Paper
19 August 1998 Blazed holographic diffraction grating fabrication using As2Se3 inorganic photoresist
Peter F. Romanenko, M. V. Sopinski, Ivan Z. Indutnyi
Author Affiliations +
Proceedings Volume 3573, OPTIKA '98: 5th Congress on Modern Optics; (1998) https://doi.org/10.1117/12.324564
Event: OPTIKA '98: Fifth Congress on Modern Optics, 1998, Budapest, Hungary
Abstract
The method of blazed holographic diffraction gratings fabricated by transformation of an original symmetric grating grooves into asymmetric ones using additional inclined irradiation by a monochromatic, or white light and repeated chemical etching have been developed. As photoresist material for gratings recording light-sensitive As2Se3 layers were used. Numerical modeling of the asymmetric groove formations was also carried out. The numerical results are in a good agreement with experimental groove profiles obtained by D3000 NanoScope. The asymmetry of produced gratings are clearly displayed in angular and spectral dependencies of the diffraction efficiency. The investigations shown that by changing the original grating formation parameters and the additional treatment conditions it is possible to produce blazed holographic gratings with designated groove form and blazed angle.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter F. Romanenko, M. V. Sopinski, and Ivan Z. Indutnyi "Blazed holographic diffraction grating fabrication using As2Se3 inorganic photoresist", Proc. SPIE 3573, OPTIKA '98: 5th Congress on Modern Optics, (19 August 1998); https://doi.org/10.1117/12.324564
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction gratings

Holography

Photoresist materials

Diffraction

Etching

Numerical modeling

Ions

Back to Top