7 April 1999 Changes in optical interference coatings exposed to 193-nm excimer laser radiation
Author Affiliations +
Abstract
The exposure of optical interference coatings to low-fluence DUV-radiation reveals changes of thin layer properties due to interactions between radiation field and thin film structure. An experimental set up for irradiating antireflective as well a high reflective coatings with 193nm excimer laser was used in order to study permanent cumulative changes in optical coatings at fluences ranging from 20mJ/cm2 with up to 240 106 laser pulses. The optical ex-situ monitoring of radiation induced modifications enabled the differentiation of coating specific and substrate inherent alteration effects. The identification of conditions as well as degradation processes during the exposure could be achieved for several types of DUV-coating materials. They were deposited with an ultra low loss evaporation process onto calcium fluoride and fused silica substrates. Fluoride coating included LaF3, Na3AlF6, MgF2, AlF3 oxide coatings consisted of SiO2 and Al2O3 exclusively.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joerg Heber, Joerg Heber, Roland Thielsch, Roland Thielsch, Holger Blaschke, Holger Blaschke, Norbert Kaiser, Norbert Kaiser, Uwe Leinhos, Uwe Leinhos, A. Goertler, A. Goertler, } "Changes in optical interference coatings exposed to 193-nm excimer laser radiation", Proc. SPIE 3578, Laser-Induced Damage in Optical Materials: 1998, (7 April 1999); doi: 10.1117/12.344384; https://doi.org/10.1117/12.344384
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT


Back to Top