7 April 1999 Quality of optical components and systems for laser applications
Author Affiliations +
Abstract
The requirements for optical components and systems which are used for laser applications are different and normally stronger compared to standard applications. First of all, the quality is determined by the optical design of components and systems are used for different applications from DUV to NIR. Furthermore, especially in high power systems the properties of the optical elements limit their general use and their life time. For the industrial fabrication of optics in large quantities special production procedure and additional measurements for the characterization of the quality have to be performed. As is well known, the short term as well as the long term stability is limited by the material, the polishing quality and the coating. Therefore toady new standards for specification and testing of absorption, scattering and laser damage are applied in the industrial fabrication. Standardized laser components and typical data of surface quality and damage threshold will be discussed.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rainer G. Schuhmann, Rainer G. Schuhmann, } "Quality of optical components and systems for laser applications", Proc. SPIE 3578, Laser-Induced Damage in Optical Materials: 1998, (7 April 1999); doi: 10.1117/12.344430; https://doi.org/10.1117/12.344430
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Source of contamination in damage-test sample and vacuum
Proceedings of SPIE (August 08 2016)
Toward Standardization In Laser-Induced Damage Testing
Proceedings of SPIE (October 20 1986)
Standardization in optics characterization
Proceedings of SPIE (November 01 2000)
Comparison Of Visibility Of Standard Scratches
Proceedings of SPIE (September 02 1985)
ASTM And OSA Efforts To Develop An Optical Surface Roughness...
Proceedings of SPIE (September 02 1985)

Back to Top