Translator Disclaimer
Paper
12 April 1999 Diffractive color separation filter for high-efficiency LCD panels
Author Affiliations +
Proceedings Volume 3636, Flat Panel Display Technology and Display Metrology; (1999) https://doi.org/10.1117/12.344655
Event: Electronic Imaging '99, 1999, San Jose, CA, United States
Abstract
Current AMLCD panel pixels are divided into sub-pixels each covered by red, green, or blue absorptive color filters to transmit each of the color components. This method discards 2/3 of available light and causes these displays to be highly inefficient. Using a diffractive color separation filter, DCSF, a much higher percentage of energy from the back-light is used in the display, which can be translated into higher brightness and lower power consumption. Such a DCSF is designed to separate the colors and focus the desired bands onto the apertures of the color pixels. The black matrix is used to block the undesired wavebands. Two basic prototype models were designed and fabricated. The first filter design constraints focusing elements and the second filter contains no focusing elements. This paper present testing results from the two prototype diffractive color separation filter designs.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter S. Erbach, Gregg T. Borek, David R. Brown, and Thomas V. Gunn "Diffractive color separation filter for high-efficiency LCD panels", Proc. SPIE 3636, Flat Panel Display Technology and Display Metrology, (12 April 1999); https://doi.org/10.1117/12.344655
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top