22 March 1999 Noise analysis of a fully integrated CMOS image sensor
Author Affiliations +
Abstract
The read noise characteristics of a 3T photodiode-based CMOS active pixel image sensor IC is described. The sensor is fabricated in Hewlett Packard's standard 0.5 micrometers and 3.3V mixed-signal process. The read noise characteristic of the analog signal path is theoretically estimated by adding together the noise contributions of the pixel, column amplifier and programmable gain amplifier (PGA). The read noise of the imager is then measured as a function of the on-chip programmable gain with a HP9494 mixed-signal production tester. An analysis of the measured read noise is performed to separate the noise contribution into pre-PGA and post-PGA components. The measured pre-PGA noise component is compared to the calculated estimate of the analog signal path noise. The measured pre-PGA noise is found to be much smaller than the calculated estimate. Consistency is substantially improved if pixel kTC reset noise is excluded from the calculated estimate.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kalwant Singh, Kalwant Singh, } "Noise analysis of a fully integrated CMOS image sensor", Proc. SPIE 3650, Sensors, Cameras, and Applications for Digital Photography, (22 March 1999); doi: 10.1117/12.342862; https://doi.org/10.1117/12.342862
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top