4 June 1999 Position control of a two-link flexible manipulator using piezoelectric actuators
Author Affiliations +
Abstract
This paper presents a hybrid actuator scheme to actively control the end-point position of a two-link flexible manipulator. A highly nonlinear system model including inertial effects is established using Lagrange's equation associated with assumed mode method. Control scheme consists of four different actuators; two servo-motors at the hubs and two piezoceramics bonded to the surfaces of the flexible links. Two sliding hyperplanes which have time varying parameters are designed for two servo-motors. The surface gradients of the hyperplanes are determined by pole assignment technique to guarantee the stability on the hyperplanes themselves. The sliding mode controllers corresponding to the hyperplanes are then synthesized on the basis of sliding mode conditions. During the motion, undesirable oscillations caused by the torques based on the rigid link dynamics are actively suppressed by applying feedback control voltages to the piezoceramic actuators. Consequently, desired tip motion is achieved. In order to demonstrate the effectiveness of the proposed methodology experiments are performed for the regulating and tracking control problem.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seung-Bok Choi, H. C. Shin, Hakil K. Kim, Jaehwan Kim, "Position control of a two-link flexible manipulator using piezoelectric actuators", Proc. SPIE 3667, Smart Structures and Materials 1999: Mathematics and Control in Smart Structures, (4 June 1999); doi: 10.1117/12.350077; https://doi.org/10.1117/12.350077
PROCEEDINGS
8 PAGES


SHARE
Back to Top