9 June 1999 Active and passive noise control using electroactive polymer actuators (EAPAs)
Author Affiliations +
Abstract
Electro-active polymer actuators (EAPA) have been a topic of research interest in the recent decades due to their ability to produce large strains under the influence of relatively low electric fields as compared to commercially available actuators. This paper investigates the feasibility of EAPA for active and passive cabin noise control. The passive damping characteristics of EAPA were determined, by measuring the transmission loss of four samples of various thickness and composition in an anechoic chamber in the 200 - 2000 Hz frequency range. This was then compared to that of Plexiglas and silicone rubber sheets of comparable thickness. The transmission loss of EAPA and Plexiglas were observed to be about the same. The transmission loss of EAPA was greater than that of silicone rubber, of the same thickness. The experimental and theoretical results computed using the mass law agree well. EAPA produces a strain of 0.006 for an applied field of 1 V/m. The ability of EAPA to potentially provide active as well as passive damping in the low to intermediate frequency range, along with being light- weight, pliable and transparent, makes it attractive for noise control applications as active/passive windows or wall papers.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kartik Ramanathan, Kartik Ramanathan, Bei Zhu, Bei Zhu, Woosuk Chang, Woosuk Chang, Vasundara V. Varadan, Vasundara V. Varadan, Vijay K. Varadan, Vijay K. Varadan, } "Active and passive noise control using electroactive polymer actuators (EAPAs)", Proc. SPIE 3668, Smart Structures and Materials 1999: Smart Structures and Integrated Systems, (9 June 1999); doi: 10.1117/12.350704; https://doi.org/10.1117/12.350704
PROCEEDINGS
6 PAGES


SHARE
Back to Top