9 June 1999 Nonlinear finite element modeling of THUNDER piezoelectric actuators
Author Affiliations +
Abstract
A NASTRAN non-linear finite element model has been developed for predicting the dome heights of THUNDER (Thin Layer Unimorph Ferroelectric Driver) piezoelectric actuators. To analytically validate the finite element model, a comparison was made with a non-linear plate solution using Von Karmen's approximation. A 500 volt input was used to examine the actuator deformation. The NASTRAN finite element model was also compared with experimental results. Four groups of specimens were fabricated and tested. Four different input voltages, which included 120, 160, 200, and 240 Vp-p with a 0 volts offset, were used for this comparison.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Barmac K. Taleghani, Barmac K. Taleghani, Joel F. Campbell, Joel F. Campbell, } "Nonlinear finite element modeling of THUNDER piezoelectric actuators", Proc. SPIE 3668, Smart Structures and Materials 1999: Smart Structures and Integrated Systems, (9 June 1999); doi: 10.1117/12.350733; https://doi.org/10.1117/12.350733
PROCEEDINGS
12 PAGES


SHARE
Back to Top