Evaluating the potential of alternating phase-shift masks using lithography simulation

Christoph M. Friedrich; Klaus Ergenzinger; Fritz Gans; Andreas Grassmann; Uwe A. Griesinger; Juergen Knobloch; Leonhard Mader; Wilhelm Maurer; Rainer Pforr

doi:10.1117/12.354371

26 July 1999 Evaluating the potential of alternating phase-shift masks using lithography simulation

Christoph M. Friedrich, Klaus Ergenzinger, Fritz Gans, Andreas Grassmann, Uwe A. Griesinger, Juergen Knobloch, Leonhard Mader, Wilhelm Maurer, Rainer Pforr

Author Affiliations +

Proceedings Volume 3679, Optical Microlithography XII; (1999) https://doi.org/10.1117/12.354371
Event: Microlithography '99, 1999, Santa Clara, CA, United States

Abstract

This paper quantifies the expected gain in the process window of 150nm structures printed with DUV for alt PSM vs. COG masks and HT PSM. Most of the analysis was performed for dense lines and isolated lines using lithography simulation. Alt PSM show an increase of dose latitude by 9 percent and an improved DOF by 0.2 micrometers for dense liens. For isolated lines the real advantage is seen in the increase of DOF by 0.7 micrometers . Furthermore it will be demonstrated, that alternating PSM can improve the imagin performance of contacts significantly over competitive techniques. Chromeless PSM may push the ultimate resolution limit. However to vary the linewidth three adjacent quartz edges must be used, since two phase edges are instable in defocus. A phase shifting region needs to exceed a minimum width in order to enhance the contrast of the aerial image of the whole feature. Experimental data and simulations show that the required minimum phase-shifter width for an isolated line is in the region of 400nm. Simulation and experiment show, that 90 degrees edges are very sensitive to defocus and neighboring patterns. Using a 3D mask simulator, correction values for etch depth and parameters for a lateral underetch were determined in order to achieve intensity balancing for alt PSM for various feature sizes.

Citation Download Citation

Christoph M. Friedrich, Klaus Ergenzinger, Fritz Gans, Andreas Grassmann, Uwe A. Griesinger, Juergen Knobloch, Leonhard Mader, Wilhelm Maurer, and Rainer Pforr "Evaluating the potential of alternating phase-shift masks using lithography simulation", Proc. SPIE 3679, Optical Microlithography XII, (26 July 1999); https://doi.org/10.1117/12.354371

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available