Paper
20 January 1999 Semiconductor lasers for high-bit-rate optical data transmission: investigations to increase the yield of laser arrays
Hartmut Hillmer, Bernd Klepser
Author Affiliations +
Proceedings Volume 3688, 6th International Conference on Industrial Lasers and Laser Applications '98; (1999) https://doi.org/10.1117/12.337528
Event: 6th International Conference on Industrial Lasers and Laser Applications '98, 1998, Shatura, Moscow Region, Russian Federation
Abstract
Our studies on the thermal cross talk of laser arrays with integrated thin film heaters involve theoretical as well as experimental investigations. Comparing the effects of intentional geometrical variations of the device design, we found that the relative thermal crosstalk depends critically on the distance between the active area and the film heater. The most striking result is that a minimization of the thermal resistivity of the device does not always lead to a reduced thermal crosstalk. We demonstrate that an additional heat barrier close to the active region and/or an improved heat transfer between the submount and the heat sink may reduce the relative thermal crosstalk, a result completely unexpected from intuitive considerations. Model calculations showed that the device yield can be increased by 20 percent improving the heat transfer between the submount and the heat sink.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hartmut Hillmer and Bernd Klepser "Semiconductor lasers for high-bit-rate optical data transmission: investigations to increase the yield of laser arrays", Proc. SPIE 3688, 6th International Conference on Industrial Lasers and Laser Applications '98, (20 January 1999); https://doi.org/10.1117/12.337528
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thin films

Silver

Semiconductor lasers

Thermal modeling

Wavelength division multiplexing

Laser welding

Temperature metrology

Back to Top