Paper
13 December 1983 Holographic And Microscopic Study Of Morphology And Velocity Distribution Of Solidifying Particles In Rapidly Stirred Melts
R. J. Smeulders, F. H. Mischgofsky, H. J . Frankena
Author Affiliations +
Proceedings Volume 0370, Holographic Data Nondestructive Testing; (1983) https://doi.org/10.1117/12.934876
Event: Holographic Data Nondestructive Testing, 1982, Dubrovnik, Croatia
Abstract
A technique is described to observe shape development and particle displacements of fast moving solidifying particles during stir casting. The optical set-up consists of a Ruby la-ser (generating pulse pairs), a frequency doubled Nd3+:YAG laser (generating single pulses at a 10 Hz repetition rate), a model device of an actual metal stir casting apparatus filled with a transparent organic alloy and three different recording systems. Double exposure holograms and microphotographs are used to analyse the three- and two-dimensional particle displacements, respectively. Simultaneously recorded videotapes, microphotographs and holograms provide the opportunity to study the shape development at a repetition rate of 10 Hz over periods of 103 seconds in an imaging volume of 3 x 2 x 2 mm3. We found that a NPA-water alloy nucleates initially as equiaxed dendritic particles. After a period of stirring, the dendrite tips become more rounded. Finally the particles obtain the shape of a bunch of grapes. This final state is in good agreement with the morphology of stir casted metal alloys. Further we found that the flow behaviour at the start of the experiment can be decisive for the solidification process. We observed Taylor vortices and measured particle displacements, that occur in the direction of rotation and also along the axis of rotation (although there was no flow pressure excerted in that direction) and in the radial direction, too.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. J. Smeulders, F. H. Mischgofsky, and H. J . Frankena "Holographic And Microscopic Study Of Morphology And Velocity Distribution Of Solidifying Particles In Rapidly Stirred Melts", Proc. SPIE 0370, Holographic Data Nondestructive Testing, (13 December 1983); https://doi.org/10.1117/12.934876
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Instrument modeling

Solids

Photomicroscopy

Holograms

Metals

Holography

RELATED CONTENT

Application Of Pulse Laser Holography
Proceedings of SPIE (July 27 1979)
Diagnostic Arc Studies With Ruby Laser
Proceedings of SPIE (March 01 1974)
Holography Of Solid Propellant Combustion
Proceedings of SPIE (November 18 1977)

Back to Top