Paper
7 September 1999 UV-optical and microstructural properties of MgF2-coatings deposited by IBS and PVD processes
Author Affiliations +
Abstract
In high quality otpical coating systems for the DUV-spectral range, MgF2 is one of the preferred deposition materials. MgF2-coatings exhibit relatively low optical losses as well as high stability and laser induced damage thresholds. In the present joint research effort of several European laboratories, the potentiality of MgF2 is evaluated in respect to the production of improved optical coatings for applications in laser technology and semiconductor lithography. For this purpose, single layers of MgF2 were deposited on superpolished fused silica and CaF2-substrates by ion beam sputtering, boat and e-beam evaporation in different laboratories. Besides photometric inspections, the samples were characterized by an optical scatter measurement facility at 193 nm and 633 nm. The structural properties were assessed using AFM, XRD, and adapted TEM-techniques invovling conventional thinning methods for the layers. For the measurement of mechanical stress in the coatings, special silicon substrates were coated and analyzed.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Detlev Ristau, Winfried Arens, Salvador Bosch, Angela Duparre, Enrico Masetti, Damien Jacob, George Kiriakidis, Francesca Peiro, Etienne Quesnel, and Alexander V. Tikhonravov "UV-optical and microstructural properties of MgF2-coatings deposited by IBS and PVD processes", Proc. SPIE 3738, Advances in Optical Interference Coatings, (7 September 1999); https://doi.org/10.1117/12.360111
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Optical coatings

Reflectivity

Magnesium fluoride

Refractive index

Surface roughness

Deposition processes

Back to Top