7 May 1999 Pigtail-type CO laser using As2S3 optical fiber
Author Affiliations +
Proceedings Volume 3740, Optical Engineering for Sensing and Nanotechnology (ICOSN '99); (1999) https://doi.org/10.1117/12.347814
Event: Optical Engineering for Sensing and Nanotechnology (ICOSN '99), 1999, Yokohama, Japan
Inserting an As2S3 optical fiber into a coupling-hole of one of the optical resonator mirrors directly, a pig-tail type CO laser is successfully demonstrated on its fundamental operational characteristics, together with theoretical treatments. First, finding the spatial intensity-distribution on the coupling-hole mirror, its effective transmittance vector t is evaluated in comparison with the measured spatial beam profile. Then, the output power is measured with the various coupling-hole mirrors, obtaining the maximum output power at the coupling-hole diameter of approximately 0.6 mm. These characteristics of the output power vs the coupling-hole diameter are theoretically explained by using the gain parameters G and the internal loss vector ai obtained, being well consistent with the experiments. As a result, the optimum coupling-hole evaluated is quite suitable to compose the pig-tail type scheme.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Satoshi Tanaka, Satoshi Tanaka, Yuzoh Setoguchi, Yuzoh Setoguchi, Mitsunori Saito, Mitsunori Saito, Heihachi Sato, Heihachi Sato, } "Pigtail-type CO laser using As2S3 optical fiber", Proc. SPIE 3740, Optical Engineering for Sensing and Nanotechnology (ICOSN '99), (7 May 1999); doi: 10.1117/12.347814; https://doi.org/10.1117/12.347814


Back to Top