24 September 1999 Advanced Geosynchronous Studies Imager: scanning CCD star detection
Author Affiliations +
The AGSI design permits scan rates slow enough to detect stars as dim as visual magnitude eight in the coarse of normal imaging. This gives many times the number of stars seen with the current Geosynchronous Operational Environmental Satellite (GOES) Imager and can eliminate the need to schedule special star looks. Besides improving image navigation and registration accuracy, the frequency observations enable the Imager to fly aboard a spacecraft with loose attitude control. The slow scan rate is thanks to the long CCD detector arrays and to the time delay integration made possible by the unique windshield wiper scan pattern. The Bremer star detection algorithm describe can be implemented onboard to reduce downlink requirements and so permit star detection across a dedicated full silicon passband. The wide passband increases the number of detectable stars, and cross checking with narrower science passbands eliminates false alarms from high energy particles while preserving low detection thresholds and sensitivity.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Donald Chu, Donald Chu, James L. Carr, James L. Carr, James C. Bremer, James C. Bremer, Jaime Esper, Jaime Esper, Randy Kindsfather, Randy Kindsfather, } "Advanced Geosynchronous Studies Imager: scanning CCD star detection", Proc. SPIE 3750, Earth Observing Systems IV, (24 September 1999); doi: 10.1117/12.363552; https://doi.org/10.1117/12.363552


Focus and alignment using out of focus stellar images at...
Proceedings of SPIE (September 16 2010)
Design of a spaceborne astrometric survey instrument
Proceedings of SPIE (August 27 1998)
Calibration and instrument status of ADEOS-II Global Imager
Proceedings of SPIE (February 01 2004)
Proposal to do fast x-ray timing with XEUS
Proceedings of SPIE (March 10 2003)

Back to Top