Translator Disclaimer
16 November 1999 Fabrication of Wolter I multilayer coated optics via electroforming: an update
Author Affiliations +
Abstract
Previously we reported the ability to lift off, via electroforming, multilayers deposited on gold coated flat mandrels. We had shown the multilayers remained intact after separation as the X-ray reflectivity produced peaks in the reflectivity versus energy measurements. Since gold is high a Z material and is not easy to remove via chemical etching, we have now developed the ability to use a low-Z material that is also etchable. Moreover, we improved the quality of the smoothing with the process of amorphous carbon nitride (CNx) deposition on electroless nickel in both our test chamber and our much larger fabrication chamber. Our method of mandrel preparation is to first deposit CNx on electroless nickel, then a low-Z release layer, and then the multilayers. We have demonstrated that flat mandrels produced in this manner can be cooled to liquid nitrogen temperatures without harm. This is important as the usual practice is to shrink mandrels that have Wolter I shape via liquid nitrogen. We have coated a truncated-cone-shaped 'engineering' (not high quality in terms of smoothness) mandrel and have removed the layers, intact, on the inside of an electroform with a cylindrical, truncated- cone geometry. We report the details of the fabrication, engineering, and X-ray tests.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Melville P. Ulmer, Robert I. Altkorn, Anita Madan, Michael E. Graham, Yip-Wah Chung, Allen S. Krieger, Chian Liu, Barry P. Lai, Derrick C. Mancini, and Peter Z. Takacs "Fabrication of Wolter I multilayer coated optics via electroforming: an update", Proc. SPIE 3773, X-Ray Optics Design, Performance, and Applications, (16 November 1999); https://doi.org/10.1117/12.370081
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

High efficiency carbon-based multilayers for LAMP at 250 eV
Proceedings of SPIE (September 04 2015)
Laterally graded multilayer optics for x-ray analysis
Proceedings of SPIE (November 23 1999)
Grazing incidence and multilayer x-ray optical systems
Proceedings of SPIE (July 11 1997)
Neutron, X Ray Scattering And TEM Studies Of Ni Ti...
Proceedings of SPIE (January 18 1989)
Performance Of Sputter Deposited Multi Layer X-Ray Mirrors
Proceedings of SPIE (October 13 1986)
Multilayer x ray optics for energies E > 8 keV...
Proceedings of SPIE (November 02 2000)

Back to Top