8 October 1999 Structural and electrical properties of sol-gel-deposited WO3 films
Author Affiliations +
Abstract
Amongst various sol-gel routes to deposit large area WO3 films for electrochromic applications, the one using peroxotungstic acid based precursor solution gives superior electrochromic films. Further improvements in the properties are possible by chemical modification of the precursor material and by controlling the post deposition thermal treatment. Both these parameters affect physical, structural, electrical and as a result electrochromic properties of the films significantly. A detailed study of these properties of the films deposited with precursor solution modified with various organic additives and different thermal parameters was undertaken. X-ray diffraction, electron microscopy and resistance measurements were used to characterize and compare the films. These properties of the films correlated to their electrochromic behavior are reported in this paper.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. A. Agnihotry, S. A. Agnihotry, Nidhi Sharma, Nidhi Sharma, M. Deepa, M. Deepa, Ram Kishore, Ram Kishore, K. N. Sood, K. N. Sood, Sudhir Kumar Sharma, Sudhir Kumar Sharma, } "Structural and electrical properties of sol-gel-deposited WO3 films", Proc. SPIE 3788, Switchable Materials and Flat Panel Displays, (8 October 1999); doi: 10.1117/12.365777; https://doi.org/10.1117/12.365777
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Sol-gel deposition of electrochromic copper oxide films
Proceedings of SPIE (October 22 1993)
Study of electrochromism in Ti WO3 films by sol gel...
Proceedings of SPIE (September 23 1998)
Tellurite glasses as a material for photonic waveguides
Proceedings of SPIE (April 09 2007)
Microstructure and properties of WO3 films made by sol gel...
Proceedings of SPIE (December 07 1992)
Transparent conducting coatings on glass tubes
Proceedings of SPIE (October 23 2002)

Back to Top