5 October 1999 Polymer-based waveguide devices for WDM applications
Author Affiliations +
Abstract
This paper summarizes the work currently in progress at CRC Canada on wavelength multiplexing components based on polymer waveguide devices for operation at 1550 nm. Planar arrayed waveguide gratings (AWGs) of various bandwidths were designed, fabricated and tested using acrylate polymer materials developed by Allied Signal Inc. Eight channel polymer demultiplexers fabricated by standard lithography show on-chip losses of 8 dB and a crosstalk of -25 dB between channels spaced 1.6 nm part. Owing to the thermo- optic properties of these polymers, the spectral response of the device scan be tuned by more than 7 nm without changes in optical crosstalk or on-chip loss. Very compact AWGs made with Allied Signal polymers are being designed and tested to address the need for cost effective, high bandwidth optical components in the telecom and datacom industries.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean-Francois Viens, Claire L. Callender, Julian P. Noad, Louay A. Eldada, Robert A. Norwood, "Polymer-based waveguide devices for WDM applications", Proc. SPIE 3799, Organic Photorefractives, Photoreceptors, Waveguides, and Fibers, (5 October 1999); doi: 10.1117/12.363901; https://doi.org/10.1117/12.363901
PROCEEDINGS
12 PAGES


SHARE
Back to Top