Translator Disclaimer
16 September 1999 Experimental underground facility to evaluate remote sensing instruments
Author Affiliations +
Proceedings Volume 3821, Environmental Sensing and Applications; (1999)
Event: Industrial Lasers and Inspection (EUROPTO Series), 1999, Munich, Germany
To carry out metrological tests on the automatic devices used in air quality monitoring networks, INERIS follows a standard text. In order to apply it, the instruments have been fed with reference mixtures of gases in several reproducible concentrations. Compliance with this requirement is quite easy to obtain, in the case of conventional techniques, but the problems remain with optical remote sensing instruments. The difficulties can be solved by using the Beer-Lambert law indicating that the product of the concentration by the distance is a constant value. To implement this optical law, INERIS uses a system with a two meters glass cell with quartz windows inserted in the instrument beam and fed dynamically with known concentrations of reference mixtures of gases. The test-bench facility is set up in a tunnel 90 meters long in INERIS. Tests on SO2, NO2 and O3 were carried out in 1997 on two types of DOAS systems set up in parallel: an OPSIS system and an Environment SA SANOA system. The following features were tested: the detection limit, the linearity and the drift. The tests results on the response of the two types of instruments are in agreement with the results obtained by the ERLAP at the Joint Research Center in Ispra.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Veronique Tatry, Nathalie Bocquet, Tamara Menard, and Michel Nomine "Experimental underground facility to evaluate remote sensing instruments", Proc. SPIE 3821, Environmental Sensing and Applications, (16 September 1999);


Shaping solar concentrator mirrors by radiative heating
Proceedings of SPIE (October 07 2014)
Case against optical gauge block metrology
Proceedings of SPIE (September 30 1998)
Methods for assessing display measurement capabilities
Proceedings of SPIE (September 15 2004)
AXAF precision metrology mount
Proceedings of SPIE (November 01 1990)

Back to Top