8 September 1999 Laser-induced plasma control in CO2 laser welding
Author Affiliations +
Proceedings Volume 3862, 1999 International Conference on Industrial Lasers; (1999) https://doi.org/10.1117/12.361089
Event: International Symposium on Industrial Lasers, 1999, Wuhan, China
A series of technological parameters in controlling plasma in deep penetration CO2 laser welding at an arrange of power level from 1 kW to 5 kW were investigated by using a precise declined-blow system by which the gas-assisting pressure and nozzle position can be precisely adjusted for various gas species and laser power levels. The mechanism of plasma-control by assist gas was also clarified on the basis of pressure measurement of assist gas, estimation of metallic vapor pressure in the cavity, and monitoring of plasma brightness by using phototransistors. It was found that the effect of assist gas on penetration depth can be divided three regions with the change of the assist gas pressure. No matter what gas species were used, only is the gas pressure slightly higher than the vapor pressure, plasma can be suppressed by forcing the vapor to flow away from the incidental laser beam along the cavity rear wall, then optimum weld beads can be obtained.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiahui Tang, Xiahui Tang, Haihong Zhu, Haihong Zhu, Guofu Zhu, Guofu Zhu, Shimin Li, Shimin Li, Jianrong Li, Jianrong Li, Luc Barrovecchio, Luc Barrovecchio, Loic Dumont, Loic Dumont, "Laser-induced plasma control in CO2 laser welding", Proc. SPIE 3862, 1999 International Conference on Industrial Lasers, (8 September 1999); doi: 10.1117/12.361089; https://doi.org/10.1117/12.361089


Process Aspects Of Laser WeldinG
Proceedings of SPIE (July 24 1979)
Influence of wire addition direction in C02 laser welding of...
Proceedings of SPIE (September 11 2002)
Japanese Market
Proceedings of SPIE (March 15 1989)

Back to Top