8 September 1999 Monomode hybrid longitudinal CO2 laser for material processing
Author Affiliations +
Proceedings Volume 3862, 1999 International Conference on Industrial Lasers; (1999) https://doi.org/10.1117/12.361157
Event: International Symposium on Industrial Lasers, 1999, Wuhan, China
A hybrid with small average power CO2 laser is presented. The laser might operate both in a continuous regime and in a pulsed one. The advantages of the good optical quality beam of a longitudinal discharge laser and of a high power peak pulse are simultaneously achieved. A high voltage capacitor which is switched on by means of a rotary spark gap sustains the pulsed regime. The commutation between the two regimes might be easily done and a hybrid operation is also obtainable. Glass surface treatment using this laser was performed. Fine polishment of the irradiated surface was achieved. The fine structure of the surfaces which were irradiated have been studied using atomic force microscopy.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mircea V. Udrea, Mircea V. Udrea, Ali Alacakir, Ali Alacakir, Sinan Bilikmen, Sinan Bilikmen, Ozgul Kusdemir, Ozgul Kusdemir, Oguz Pervan, Oguz Pervan, } "Monomode hybrid longitudinal CO2 laser for material processing", Proc. SPIE 3862, 1999 International Conference on Industrial Lasers, (8 September 1999); doi: 10.1117/12.361157; https://doi.org/10.1117/12.361157


Laser polishing of glass
Proceedings of SPIE (October 10 2015)
Laser assisted graffiti paints removing
Proceedings of SPIE (February 28 2011)
Laser application for optical glass polishing
Proceedings of SPIE (August 18 1996)

Back to Top