Paper
8 September 1999 Preparation and structure characterization of CeO2 films on stainless steel substrates deposited by laser ablation with Ar+ ion beam assistance
Xintang Huang, You-qing Wang, Qiulang Wang, Qingming Chen, Qiyang Xu, Zhongke Wang
Author Affiliations +
Proceedings Volume 3862, 1999 International Conference on Industrial Lasers; (1999) https://doi.org/10.1117/12.361118
Event: International Symposium on Industrial Lasers, 1999, Wuhan, China
Abstract
The CeO2 films were deposited by pulsed laser ablation on stainless steel substrates at room temperature with the Ar+ ion beam assistance. The results show that when the CeO2 films were deposited directly on the stainless steel substrates, the desired (001)-normal textured were achieved, but there was no evidence for alignment of in- plane crystal axes. Further experimental results indicate that CeO2/YSZ (Yttria-Stabilized Zirconia)/stainless steel films deposited under the same conditions are not only normal orientation to the substrate's surface but also highly in-plane textured.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xintang Huang, You-qing Wang, Qiulang Wang, Qingming Chen, Qiyang Xu, and Zhongke Wang "Preparation and structure characterization of CeO2 films on stainless steel substrates deposited by laser ablation with Ar+ ion beam assistance", Proc. SPIE 3862, 1999 International Conference on Industrial Lasers, (8 September 1999); https://doi.org/10.1117/12.361118
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ion beams

Argon

Laser ablation

Crystals

Laser crystals

Laser energy

Laser systems engineering

RELATED CONTENT

In plane aligned YBCO tape on textured YSZ buffer layer...
Proceedings of SPIE (September 08 1999)
Ablation study with a Nd YAG laser in enhanced free...
Proceedings of SPIE (June 29 2001)
Coatings for thin-disk laser systems
Proceedings of SPIE (October 03 2011)
Femtosecond laser milling of ultrathin films of LiNbO3
Proceedings of SPIE (May 12 2008)

Back to Top