Porous silicon process for encapsulated single-crystal surface-micromachined microstructures

James D. Seefeldt; Yogesh B. Gianchandani; Michael Mattes; Larry Reimer

doi:10.1117/12.361229

Translator Disclaimer

30 August 1999 Porous silicon process for encapsulated single-crystal surface-micromachined microstructures

James D. Seefeldt, Yogesh B. Gianchandani, Michael Mattes, Larry Reimer

Author Affiliations +

Proceedings Volume 3874, Micromachining and Microfabrication Process Technology V; (1999) https://doi.org/10.1117/12.361229
Event: Symposium on Micromachining and Microfabrication, 1999, Santa Clara, CA, United States

Abstract

This paper describes a 10-mask process for fabricating single crystal, surface micromachined devices by using porous silicon as a sacrificial layer, and an n-type epitaxial layer for structural material. Single crystal structures have the important advantage over polysilicon structures of precisely controlled material properties, in particular Young's Modulus and residual strain. Additionally, the epitaxial layer is suitable for integrating circuitry, and provides a promising alternative for integrated microsystems. This results in a process with similar flexibility in device design to a polysilicon surface micromachined process, but with the control of a bulk silicon technology. The process also includes provisions for device encapsulation in vacuum using reactive sealing of the microstructure with an LPCVD polysilicon layer. Although this technology is versatile and can be used for a variety of microstructures, the primary demonstration vehicles used in this research effort have been resonators. Some of the key problems is using porous silicon processes include: dimensional control of the porous silicon region; creating a high aspect ratio porous silicon region; eliminating defects induced by the porous silicon process in the remaining silicon structure; and protection of the oxidized porous silicon from etching prior to sacrificial etch.

Citation Download Citation

James D. Seefeldt, Yogesh B. Gianchandani, Michael Mattes, and Larry Reimer "Porous silicon process for encapsulated single-crystal surface-micromachined microstructures", Proc. SPIE 3874, Micromachining and Microfabrication Process Technology V, (30 August 1999); https://doi.org/10.1117/12.361229

ACCESS THE FULL ARTICLE