1 February 2000 Light alloy valorization by excimer laser surface nitriding
Author Affiliations +
Proceedings Volume 3885, High-Power Laser Ablation II; (2000) https://doi.org/10.1117/12.376958
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan
Abstract
The excimer laser nitriding process reported is developed to enhance mechanical properties of aluminum alloys. An excimer laser beam is focused onto the alloy surface in a cell containing 1 bar nitrogen gas. A vapor plasma is expanding from the surface and shock wave dissociates and ionizes nitrogen. Then vapor and gas species stay several hundreds of microsecond(s) in contact with the surface and nitrogen diffuses in depth. Thus it is necessary to work with a sufficient laser fluence to create the plasma, but this fluence must be limited to prevent from a too large laser-induced surface roughness. The nitrogen concentration profiles are determined from RBS and SEM coupled to EDX probe analysis. The roughness and surface state are studied to define the best irradiation conditions corresponding to a smooth and homogeneous surface.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eric Sicard, Caroline Andreazza-Vignolle, Chantal Boulmer-Leborgne, Philippe Ch. Delaporte, Marc L. Sentis, Michel Frainais, "Light alloy valorization by excimer laser surface nitriding", Proc. SPIE 3885, High-Power Laser Ablation II, (1 February 2000); doi: 10.1117/12.376958; https://doi.org/10.1117/12.376958
PROCEEDINGS
11 PAGES


SHARE
Back to Top