14 January 2000 Cutting performance of a chemical oxygen-iodine laser on aerospace and industrial materials
Author Affiliations +
Proceedings Volume 3887, High-Power Lasers in Civil Engineering and Architecture; (2000) https://doi.org/10.1117/12.375181
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan
Abstract
A chemical oxygen-iodine laser (COIL) was used for cutting aluminum, titanium, inconel and copper plates. The laser was operated with a stable resonator having an intracavity aperture to produce a circular COIL beam with very few transverse modes. The multimode focal spot diameter was calculated to be 0.24 mm. The new aluminum cut was of particularly high kerf edge quality. These COIL cutting data are compared with an existing theoretical laser cutting model. Using thermophysical data for aluminum, titanium,l inconel and copper, this theory agrees very well with the data. To test the versatility of the model, the effects of different assumptions are examined; different assumptions produced very little effect on model predictions at high cutting speeds and a small difference at very slow cutting speeds. Overall, the theoretical model provides good agreement with experiments for a wide variety of metals.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. Pete Latham, W. Pete Latham, Kip R. Kendrick, Kip R. Kendrick, James A. Rothenflue, James A. Rothenflue, Aravinda Kar, Aravinda Kar, David L. Carroll, David L. Carroll, } "Cutting performance of a chemical oxygen-iodine laser on aerospace and industrial materials", Proc. SPIE 3887, High-Power Lasers in Civil Engineering and Architecture, (14 January 2000); doi: 10.1117/12.375181; https://doi.org/10.1117/12.375181
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

COIL fiber transmission for material cutting applications
Proceedings of SPIE (November 09 2003)
CO[sub]2[/sub] Laser Cutting Of Non-Ferrous Metals
Proceedings of SPIE (March 23 1989)
Cutting performance of a chemical oxygen-iodine laser
Proceedings of SPIE (May 11 1998)
COIL activities in Japan: industrial COIL development
Proceedings of SPIE (February 12 1996)
Laser chemical vapor deposition of Cu and Ni in integrated...
Proceedings of SPIE (September 11 1996)
Industrial COIL systems--part 2: gas-laser cutting
Proceedings of SPIE (March 22 2005)

Back to Top