7 February 2000 Application of a modern high-power laser to heavy section welding
Author Affiliations +
Proceedings Volume 3888, High-Power Lasers in Manufacturing; (2000) https://doi.org/10.1117/12.377046
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan
State of the art of welding with carbon-dioxide laser radiation is to weld steel material up to a wall thickness of 20 mm in one pass utilizing beam powers up to 20 kW. Welding material exceeding 20 mm wall thickness requires the application of multiple pass techniques. Since the process behavior deviates from the conventional deep penetration effect measures due to beam handling and shaping have to be taken into account. Within the paper the effects of beam oscillation and focused beam shaping on the process will be discussed. Experimental results concerning the influence of beam characteristics, beam handling, and wire feed on the seam quality will be presented. The experiments were carried out by means of a modern beam source with a nominal output power of 20 kW which offer the opportunity of raw beam shaping by a telescope. The material applied was a fine grain structural steel. The application of multiple pass welding with laser radiation offers great opportunities in industries dealing with materials of high wall thickness.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Martin Dahmen, Martin Dahmen, Frederic Coste, Frederic Coste, Goetz Kapper, Goetz Kapper, Wolfgang Knapp, Wolfgang Knapp, } "Application of a modern high-power laser to heavy section welding", Proc. SPIE 3888, High-Power Lasers in Manufacturing, (7 February 2000); doi: 10.1117/12.377046; https://doi.org/10.1117/12.377046


Optics for multimode lasers with elongated depth of field
Proceedings of SPIE (February 21 2017)
Surface Hardening: Beam Shaping And Coating Techniques
Proceedings of SPIE (October 25 1989)
Girth welding of X-60 pipeline with a 10kW laser
Proceedings of SPIE (October 20 1986)
Optical Design Considerations For Laser Fusion Reactors
Proceedings of SPIE (January 19 1978)
Metal matrix composite foam a new material for sandwich...
Proceedings of SPIE (September 30 1990)

Back to Top