Paper
7 February 2000 Development of high-power CO2 lasers and laser material processing
Ashish Kumar Nath, Praveen Choudhary, Manoj Kumar, R. Kaul
Author Affiliations +
Proceedings Volume 3888, High-Power Lasers in Manufacturing; (2000) https://doi.org/10.1117/12.377067
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan
Abstract
Scaling laws to determine the physical dimensions of the active medium and optical resonator parameters for designing convective cooled CO2 lasers have been established. High power CW CO2 lasers upto 5 kW output power and a high repetition rate TEA CO2 laser of 500 Hz and 500 W average power incorporated with a novel scheme for uniform UV pre- ionization have been developed for material processing applications. Technical viability of laser processing of several engineering components, for example laser surface hardening of fine teeth of files, laser welding of martensitic steel shroud and titanium alloy under-strap of turbine, laser cladding of Ni super-alloy with stellite for refurbishing turbine blades were established using these lasers. Laser alloying of pre-placed SiC coating on different types of aluminum alloy, commercially pure titanium and Ti-6Al-4V alloy, and laser curing of thermosetting powder coating have been also studied. Development of these lasers and results of some of the processing studies are briefly presented here.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ashish Kumar Nath, Praveen Choudhary, Manoj Kumar, and R. Kaul "Development of high-power CO2 lasers and laser material processing", Proc. SPIE 3888, High-Power Lasers in Manufacturing, (7 February 2000); https://doi.org/10.1117/12.377067
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Carbon dioxide lasers

Gas lasers

Laser processing

Continuous wave operation

Coating

High power lasers

Laser welding

RELATED CONTENT

High-power CO lasers for materials processing
Proceedings of SPIE (August 16 1994)
Coaxially excited pulsed-gas lasers for precise machining
Proceedings of SPIE (February 07 2000)
High Power Laser Processing Of Materials
Proceedings of SPIE (September 22 1987)
Laser In Materials Processing Report On Five Years...
Proceedings of SPIE (March 27 1985)
New proposal for the solution of thick plate lap joint...
Proceedings of SPIE (March 03 2003)

Back to Top