7 February 2000 Pulsed YAG laser spot welding under microgravity
Author Affiliations +
Proceedings Volume 3888, High-Power Lasers in Manufacturing; (2000) https://doi.org/10.1117/12.377070
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan
Abstract
With the objectives of obtaining a fundamental knowledge of laser welding technology inside and outside the spacecraft in space, pulsed YAG laser spot welding was performed on the metal plates in Ar gas atmosphere or a vacuum in the falling microgravity apparatus equipped with the fiber-delivered laser focusing optics. The influence of gravity or microgravity on penetration and welding defect formation was further clarified by comparing the welds made in the normal flat and overhead positions. Almost all results of weld penetration and defect formation under microgravity were similar to those under normal gravity except the welding result of aluminum alloy A5083 subjected to the high power density laser, and were between normal gravity and overhead position welding results. Welding in a vacuum was characterized by the formation of a narrower and cone-shaped bottom in any alloy weld. Porosity was easily formed in any deeply penetrated weld metal under high power density welding with a rectangular pulse-shaped laser, and could be reduced by utilizing pulse-controlled laser even under microgravity.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seiji Katayama, Koji Tanaka, Masami Mizutani, Akira Matsunawa, "Pulsed YAG laser spot welding under microgravity", Proc. SPIE 3888, High-Power Lasers in Manufacturing, (7 February 2000); doi: 10.1117/12.377070; https://doi.org/10.1117/12.377070
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Accurate manipulation using laser technology
Proceedings of SPIE (August 18 1997)
Welding of aluminium, copper, and brass
Proceedings of SPIE (August 18 1997)
Comparative Welding Performance Of A 2 Kw Pulsed Yag Laser
Proceedings of SPIE (October 26 1989)
High-power COIL and YAG laser welding
Proceedings of SPIE (May 06 2002)
Laser welding of Al-Mg alloy with the thin plate
Proceedings of SPIE (January 13 2005)

Back to Top