3 April 2000 Electric discharge lasers with plate electrodes and stabilized discharge
Author Affiliations +
Proceedings Volume 3889, Advanced High-Power Lasers; (2000) https://doi.org/10.1117/12.380853
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan
Abstract
The electric-discharge HF, N2, XeF-lasers with a new designs of electrode unit was developed. Both electrodes are made of insulated plates, and each pair of plates, located in one plane forms the electrode section. Each electrode section is connected to a power source through stabilizing inductance. Stable homogeneous discharge in electric-discharge lasers based on multisectional electrode unit was realized. High efficiency of generation in HF, N2 and XeF-lasers was received. It is shown for HF-laser, that with a new electrode unit in the version without preionization the volumetric discharge in a wide range of active gas pressure 20...130 Torr and the value of an interelectrode gap 10...50 nm are realized. On a mixture of H2 - SF6 the laser energy 1,2 J with technical efficiency 3,5% was received. Also N2 and XeF-lasers based on multisectional electrode unit in the version with spark gaps preionization were investigated. In N2-laser without gas flow, the pulse repetition rate up to 200 Hz was realized. In some modes practically linear growth of laser average power up to 60 Hz was observed.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Boris V. Lazhintsev, Vladimir A. Nor-Arevyan, V. D. Selemir, "Electric discharge lasers with plate electrodes and stabilized discharge", Proc. SPIE 3889, Advanced High-Power Lasers, (3 April 2000); doi: 10.1117/12.380853; https://doi.org/10.1117/12.380853
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

200 W spiker-sustainer XeCl laser
Proceedings of SPIE (August 16 1994)
Research of short pulse discharge XeCl laser
Proceedings of SPIE (March 23 2005)

Back to Top