12 November 1999 Deposition of potassium lithium niobate films by sol-gel method
Author Affiliations +
Proceedings Volume 3896, Design, Fabrication, and Characterization of Photonic Devices; (1999) https://doi.org/10.1117/12.370342
Event: International Symposium on Photonics and Applications, 1999, Singapore, Singapore
Potassium lithium niobate (KLN) films have been prepared by sol-gel method using metal ethoxides as starting materials. The films were deposited by spin coating and were annealed in air in a conventional oven as well as in a rapid thermal processor (RTP). X-ray diffraction and Raman scattering measurements have shown that polycrystalline KLN films with tetragonal tungsten-bronze-type structure could be obtained on both SiO2 buffered Si and fused quartz substrates. Surface morphology studies indicated that RTP annealing could avoid film cracking and enable nanostructured low- surface roughness KLN films to be formed. Optical waveguiding experiments showed that the films have refractive indices close to those of their single crystal and could support several modes. The films deposited on fused quartz were highly transparent in the visible-near IR spectral range and the absorption edges of the films, as determined from the absorption data, were found to shift towards the violet spectral side.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hong Xi Zhang, Hong Xi Zhang, Yan Zhou, Yan Zhou, Chan Hin Kam, Chan Hin Kam, X. Q. Han, X. Q. Han, Shi De Cheng, Shi De Cheng, Boon Siew Ooi, Boon Siew Ooi, Yee Loy Lam, Yee Loy Lam, Yuen Chuen Chan, Yuen Chuen Chan, Zhuo Sun, Zhuo Sun, M. B. Yu, M. B. Yu, Xu Shi, Xu Shi, Soon Fatt Yoon, Soon Fatt Yoon, } "Deposition of potassium lithium niobate films by sol-gel method", Proc. SPIE 3896, Design, Fabrication, and Characterization of Photonic Devices, (12 November 1999); doi: 10.1117/12.370342; https://doi.org/10.1117/12.370342

Back to Top