22 June 2000 Ceramic piezoelectric fibers: correlating single-fiber properties with active fiber composite performance
Author Affiliations +
Abstract
A methodology has been developed to monitor the quality and performance of Lead Zirconate Titanate (PZT) active fibers manufactured by CeraNova Corporation (Franklin, MA) in a diameter range of 80 to 500 μm for use in Active Fiber Composites (AFC) for structural control applications. Single fiber P-E loop tests (induced polarization versus applied electric field) and density measurements are conducted on samples from each fiber production run. Results are correlated with AFC pack quality, determined by measuring actuation performance (composite strain versus applied electric field) and peak capacitance. Single fiber piezoelectric properties are comparable to those of bulk PZT-5A, i.e. remanent polarization Pr in excess of 30 μC/cm2 and coercive field Ec on the order of 14 kV/cm. Sintered fiber density is consistently greater than 95% of theoretical. AFC packs routinely exhibit actuation in excess of 1200 microstrain at 2.5 kV/mm applied field. Fiber characterization techniques and quantitative single fiber behavior versus composite performance correlations are discussed.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavel Bystricky, Pavel Bystricky, } "Ceramic piezoelectric fibers: correlating single-fiber properties with active fiber composite performance", Proc. SPIE 3985, Smart Structures and Materials 2000: Smart Structures and Integrated Systems, (22 June 2000); doi: 10.1117/12.388870; https://doi.org/10.1117/12.388870
PROCEEDINGS
8 PAGES


SHARE
Back to Top