20 April 2000 Placement of feedback controllers on civil structures using genetic algorithms
Author Affiliations +
Abstract
Genetic algorithms will be used for the optimization of feedback gains and controller placement for discrete building structures. The optimal design and placement of controllers at discrete locations is an important problem that will have impact on the control of civil engineering structures. Though algorithms exist for the placement of sensor/actuator systems on continuous structures, the placement of controllers on discrete civil structures is a very difficult problem. Because of the nature of civil structures, it is not possible to place sensors and actuators at any location in the structure. This usually creates a nonlinear constrained mixed integer problem that can be very difficult to solve. Using genetic algorithms in conjunction with gradient based optimization techniques will allow for the simultaneous placement and design of an effective structural control system. The introduction of genetic-based algorithms should increase the rate of convergence and thus reduce the computational time for solving the difficult control problem.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Makola M. Abdullah, Makola M. Abdullah, Andy Richardson, Andy Richardson, Jameel Hanif, Jameel Hanif, } "Placement of feedback controllers on civil structures using genetic algorithms", Proc. SPIE 3988, Smart Structures and Materials 2000: Smart Systems for Bridges, Structures, and Highways, (20 April 2000); doi: 10.1117/12.383163; https://doi.org/10.1117/12.383163
PROCEEDINGS
11 PAGES


SHARE
Back to Top