Paper
5 May 2000 Nondestructive evaluation of aircraft structure using lock-in thermography
Weimin Bai, Brian Stephen Wong
Author Affiliations +
Abstract
This paper describes experiments conducted with the lock-in thermographic procedure. A carbon fiber reinforced composite specimen with defects of various sizes and depths below the test surface was analyzed. The detectivity of AGEMA 900 lock- in system was investigated. The experimental results show that the detectivity of lock-in thermography depends on inspection frequency, intensity of heat source, resolution of lock-in system, distance between the IR camera and the object. It was found that inspection frequency has significant effect on the phase difference produced by a certain defect. At blind frequency, the defect produces no difference or very small difference. There are 2 optimum frequencies at which the defect produces maximum positive and negative phase differences respectively. At a depth that both high frequency and low frequency thermal waves can reach, lock-in thermography is more sensitive at high frequency. Lock-in phase sensitive thermography was found to be more sensitive than conventional reflection and transmission thermography. Sight line angle, which is the angle between the surface plane of the object and the sight line of the camera, has no significant effect on detectivity of lock-in thermography.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weimin Bai and Brian Stephen Wong "Nondestructive evaluation of aircraft structure using lock-in thermography", Proc. SPIE 3994, Nondestructive Evaluation of Aging Aircraft, Airports, and Aerospace Hardware IV, (5 May 2000); https://doi.org/10.1117/12.385033
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermography

Infrared cameras

Inspection

Cameras

Nondestructive evaluation

Defect detection

Infrared imaging

Back to Top