Paper
21 July 2000 Beam-monitoring system using microapertures for electron-beam lithography
Jun Takamatsu, Naoharu Shimomura, Hitoshi Sunaoshi, Kiyoshi Hattori, Munehiro Ogasawara, Tetsuro Nakasugi
Author Affiliations +
Abstract
A new beam-monitoring system for electron-beam lithography is proposed, which can be used for the variably shaped beam (VSB) method, the character projection (CP) method and the electron- beam mask (EB mask) projection method. The system is composed of micro-apertures and a detector placed below the micro- aperture, which is installed at a focal plane of a mask writer. The micro-apertures are formed on a 1-micrometer-thick Si film on which two 200-nm-thick W layers are deposited. A shaped beam is scanning over the micro-aperture, and the electrons that pass through the micro-aperture are directly detected with the detector, so that the two-dimensional shape and size of the beam are measured. The contrast and the signal-to-noise ratio obtained by this system are greatly superior to those obtained by the conventional mark-scanning method.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jun Takamatsu, Naoharu Shimomura, Hitoshi Sunaoshi, Kiyoshi Hattori, Munehiro Ogasawara, and Tetsuro Nakasugi "Beam-monitoring system using microapertures for electron-beam lithography", Proc. SPIE 3997, Emerging Lithographic Technologies IV, (21 July 2000); https://doi.org/10.1117/12.390105
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Electrons

Sensors

Beam shaping

Photomasks

Monte Carlo methods

Lithography

Back to Top