2 August 2000 Design issues for the active control system of the California Extremely Large Telescope (CELT)
Author Affiliations +
Abstract
We explore the issues in the control and alignment of the primary mirror of the proposed 30 meter California Extremely Large Telescope and other very large telescopes with segmented primaries (consisting of 1000 or more segments). We show that as the number of segments increases, the noise in the telescope active control system (ACS) increases, roughly as (root)n. This likely means that, for a thousand segment telescope like CELT, Keck-style capacitive sensors will not be able to adequately monitor the lowest spatial frequency degrees of freedom of the primary mirror, and will therefore have to be supplemented by a Shack-Hartmann-type wavefront sensor. However, in the case of segment phasing, which is governed by a `control matrix' similar to that of the ACS, the corresponding noise is virtually independent of n. It follows that reasonably straightforward extensions of current techniques should be adequate to phase the extremely large telescopes of the future.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gary A. Chanan, Gary A. Chanan, Jerry E. Nelson, Jerry E. Nelson, Catherine Mayumi Ohara, Catherine Mayumi Ohara, Edwin Sirko, Edwin Sirko, } "Design issues for the active control system of the California Extremely Large Telescope (CELT)", Proc. SPIE 4004, Telescope Structures, Enclosures, Controls, Assembly/Integration/Validation, and Commissioning, (2 August 2000); doi: 10.1117/12.393941; https://doi.org/10.1117/12.393941
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT


Back to Top