14 July 2000 Cathode testing at the Air Force Research Laboratory
Author Affiliations +
An integral part of any vacuum rf device is the cathode. Many rf and microwave tubes utilize thermionic cathodes. However, these cathodes are generally limited to current densities less than 100 A/cm2, a limitation too great for the majority of High Power Microwave tubes. At the Air Force Research Laboratory, Directed Energy Directorate, we have to study a variety of explosive emission cathodes. This paper presents results on studies of several types of cathodes tested in a simple circular geometry. We also present results of research on different types of anode material. The data includes measurements of current, voltage, cathode lifetime, and cathode/anode out-gassing.15
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Donald A. Shiffler, Donald A. Shiffler, M. Lacour, M. Lacour, K. Golby, K. Golby, Miguel D. Sena, Miguel D. Sena, Ryan J. Umstattd, Ryan J. Umstattd, John W. Luginsland, John W. Luginsland, K. J. Hendricks, K. J. Hendricks, Thomas A. Spencer, Thomas A. Spencer, Aimee N. Gibbs, Aimee N. Gibbs, M. Ruebush, M. Ruebush, D. Zagar, D. Zagar, } "Cathode testing at the Air Force Research Laboratory", Proc. SPIE 4031, Intense Microwave Pulses VII, (14 July 2000); doi: 10.1117/12.391795; https://doi.org/10.1117/12.391795


Single-pulse high-power microwave detector
Proceedings of SPIE (October 02 1997)
Gasses evolved from the common cold cathode
Proceedings of SPIE (October 27 1996)
Etch durable spin-on hard mask
Proceedings of SPIE (April 15 2011)
Cesium iodide cathodes for high-power microwave devices
Proceedings of SPIE (June 30 1999)
Nanoscale cutting mechanism by molecular dynamics simulation
Proceedings of SPIE (November 18 2007)

Back to Top