22 August 2000 Land mine detection measurements using acoustic-to-seismic coupling
Author Affiliations +
Abstract
During the early 1980s, the phenomenon of acoustic-to- seismic coupling was used to detect buried objects or mines. In these early measurements, large 2 Hz geophones measured the low frequency normal component of the soil particle velocity over buried targets. Several different, naturally- occurring ground types were studied in these measurement, including grass-covered ground; bare, sandy soil surfaces; and 'dirt' roads. Since the large geophone averages the particle velocity over the area of the sensor case, acoustic-to-seismic transfer function measurements were made with new, smaller-sized geophones. Higher frequency measurements were made using accelerometers. 3D maps of the surface particle velocity were made using measured seismic/acoustic transfer function data. Recognizing the need for a non-contact sensor and the need to investigate the geophone/soil coupling effect in the acoustic-to-seismic transfer function, additional measurements were made using a laser Doppler vibrometer (LDV). This paper explains the acoustic-to-seismic coupling mine detection measurement technique using both geophones and an LDV. The early measurements of the acoustic-to-seismic coupling transfer function for mine-like targets are discussed as well as some recent measurements using a LDV.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ning Xiang, James M. Sabatier, "Land mine detection measurements using acoustic-to-seismic coupling", Proc. SPIE 4038, Detection and Remediation Technologies for Mines and Minelike Targets V, (22 August 2000); doi: 10.1117/12.396292; https://doi.org/10.1117/12.396292
PROCEEDINGS
11 PAGES


SHARE
Back to Top