Paper
13 July 2000 All-fiber add/drop wavelength routing structure
Sarun Sumriddetchkajorn, Nabeel A. Riza
Author Affiliations +
Abstract
A fiber-connectorized multiwavelength 2 X 2 switch structure is introduced for the first time that deploys a fiber loop mirror arrangement with polarization control. Micromachine-based fiber squeezers that employ electrostatic actuation, magnetic actuation, and magnetic levitation and propulsion techniques are proposed for the implementation of a low-cost, high-speed, and compact polarization controller. Switch operation is achieved via a programmable waveplate effect rather than an optical power consuming long fiber loop length non-linear optical effect. The results from an experimental four-wavelength (i.e., 1546.92 nm, 1548.52 nm, 1550.12 nm, and 1551.72 nm) proof of concept switch using two mechanical fiber-based polarization controllers embedded in a short 7 m fiber loop indicates an average optical coherent crosstalk of - 31.2 dB. Presently, optical loss is mainly limited by the WDM devices used in our experimental setup. Hence, without the WDM multiplexers, an average optical loss of 2.22 dB is measured over a 50 nm optical bandwidth. Also, an average 0.08 dB polarization dependent loss is measured for this broadband switch.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sarun Sumriddetchkajorn and Nabeel A. Riza "All-fiber add/drop wavelength routing structure", Proc. SPIE 4046, Advances in Optical Information Processing IX, (13 July 2000); https://doi.org/10.1117/12.391939
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switches

Wavelength division multiplexing

Polarization

Fiber optics

Optical fibers

Structured optical fibers

Phase shifts

Back to Top