Metal processing with ultrashort laser pulses

Paul Stuart Banks; M. D. Felt; Aleksey M. Komashko; Michael D. Perry; Alexander M. Rubenchik; Brent C. Stuart

doi:10.1117/12.407345

16 August 2000 Metal processing with ultrashort laser pulses

Paul Stuart Banks, M. D. Felt, Aleksey M. Komashko, Michael D. Perry, Alexander M. Rubenchik, Brent C. Stuart

Proceedings Volume 4065, High-Power Laser Ablation III; (2000) https://doi.org/10.1117/12.407345
Event: High-Power Laser Ablation, 2000, Santa Fe, NM, United States

Abstract

Femtosecond laser ablation has been shown to produce well-defined cuts and holes in metals with minimal heat effect to the remaining material. Ultrashort laser pulse processing shows promise as an important technique for materials processing. We will discuss the physical effects associated with processing based experimental and modeling results. Intense ultra-short laser pulse (USLP) generates high pressures and temperatures in a subsurface layer during the pulse, which can strongly modify the absorption. We carried out simulations of USLP absorption versus material and pulse parameters. The ablation rate as function of the laser parameters has been estimated. Since every laser pulse removes only a small amount of material, a practical laser processing system must have high repetition rate. We will demonstrate that planar ablation is unstable and the initially smooth crater bottom develops a corrugated pattern after many tens of shots. The corrugation growth rate, angle of incidence and the polarization of laser electric field dependence will be discussed. In the nonlinear stage, the formation of coherent structures with scales much larger than the laser wavelength was observed. Also, there appears to be a threshold fluence above which a narrow, nearly perfectly circular channel forms after a few hundred shots. Subsequent shots deepen this channel without significantly increasing its diameter. The role of light absorption in the hole walls will be discussed.

Citation Download Citation

Paul Stuart Banks, M. D. Felt, Aleksey M. Komashko, Michael D. Perry, Alexander M. Rubenchik, and Brent C. Stuart "Metal processing with ultrashort laser pulses", Proc. SPIE 4065, High-Power Laser Ablation III, (16 August 2000); https://doi.org/10.1117/12.407345

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available