19 July 2000 Improvement of Cr dry etching characteristics with the MERIE system
Author Affiliations +
Proceedings Volume 4066, Photomask and Next-Generation Lithography Mask Technology VII; (2000) https://doi.org/10.1117/12.392059
Event: Photomask and Next Generation Lithography Mask Technology VII, 2000, Kanagawa, Japan
Abstract
Dry etching characteristics of Cr films were investigated and some improvements have ben done with magnetically enhanced reactive ion etching (MERIE) system. Clear field patterns and ark field ones exposed on thin EB resists, whose thickness was less than 300 nm, were etched. Although there had been some difficulties in etching of clear-field pattens with SAL-601, these situations were much improved with an appropriate etching condition of magnetic field. It was found that magnetic field intensity affected Cr etching distributions very much. In marked contrast to the above results, MFI condition showed little contributions to the etching distribution of dark field patterns exposed on ZEP- 7000. It was shown that some waveforms of magnetic field could be effective to improve the etching characteristics for the plate whose etching area was extremely small. Etching characteristics for these extremely varied Cr-loaded are considered through the above etching results. Discussions about more useful dry etching process with MERIE system are also described.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hitoshi Handa, Satoshi Yamauchi, Hisatsugu Shirai, "Improvement of Cr dry etching characteristics with the MERIE system", Proc. SPIE 4066, Photomask and Next-Generation Lithography Mask Technology VII, (19 July 2000); doi: 10.1117/12.392059; https://doi.org/10.1117/12.392059
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Improvement of ZEN 4100
Proceedings of SPIE (July 28 1997)
Fabrication of phase-shifting mask
Proceedings of SPIE (July 01 1991)
Process bias control with thin Cr film blanks for 90...
Proceedings of SPIE (December 27 2002)
Investigations of CD variation in Cr dry etching process
Proceedings of SPIE (January 22 2001)
Dry etching technology of Cr films to produce fine pattern...
Proceedings of SPIE (December 30 1999)
Actual use of phase-shift mask
Proceedings of SPIE (December 08 1995)

Back to Top