1 September 2000 1D and 2D laser line scan generation using a fiber optic resonant scanner
Author Affiliations +
Proceedings Volume 4075, Micro-Opto-Electro-Mechanical Systems; (2000) https://doi.org/10.1117/12.397936
Event: Symposium on Applied Photonics, 2000, Glasgow, United Kingdom
Abstract
Imaging the transverse vibrations of a resonating fibre cantilever is shown to be an effective method for generating 1D and 2D laser line scans. The resonant bending modes were excited by mounting a short length of 0.633(mu) m single mode optical fibre on to a commercially available piezo-electric transducer. For an applied sinusoidal driving voltage of 20V pk-pk, the maximum displacement at the free end of an 11mm long fibre cantilever exceeded +/- 1.0mm at resonance. The motion at the free end of the fibre was imagined and magnified using a 2mm diameter graded index lens and the resulting flying spot line scan was found to subtend a maximum arc of +/- 10 degree(s). Two distinct signal detection schemes were implemented and evaluated using standard bar code targets printed on plain paper. 2D Lissajous scans were demonstrated by exciting the orthogonal transverse bending modes of optical fibres with non-circular cross sectional areas. Both D-shaped fibres and circular fibres modified by reactive ion etching were investigated. The principles underlying the design of this Fibre Optic Resonant Scanner (FORS) are directly applicable to the design of an integrated optoelectronic micro-electro-mechanical scanning device.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David A. Roberts, David A. Roberts, Richard R. A. Syms, Richard R. A. Syms, } "1D and 2D laser line scan generation using a fiber optic resonant scanner", Proc. SPIE 4075, Micro-Opto-Electro-Mechanical Systems, (1 September 2000); doi: 10.1117/12.397936; https://doi.org/10.1117/12.397936
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Fiber Optic Method For Sensing Diaphragm Deflection
Proceedings of SPIE (September 19 1983)
Multiplexed Fiber Optic Thermometer
Proceedings of SPIE (February 01 1989)
Microphone based on fiber optic reflective sensor
Proceedings of SPIE (September 25 1995)

Back to Top