6 November 2000 High-precision microcutting of ceramics with short-pulsed solid state lasers
Author Affiliations +
Proceedings Volume 4088, First International Symposium on Laser Precision Microfabrication; (2000) https://doi.org/10.1117/12.405713
Event: First International Symposium on Laser Precision Microfabrication (LPM2000), 2000, Omiya, Saitama, Japan
Abstract
This contribution will present results for high-precision cutting of technical ceramics with short-pulsed solid-state lasers in fundamental and frequency-doubled wavelength. On the basis of ample experiments, a surprising absorption behavior of some ceramics in the case of irradiation with high intensity will be discussed. Furthermore, the influence of wavelength and process gas on cutting speed and quality is demonstrated. The investigations resulted in a process strategy with multiple passing over of the kerf suited for remarkably improving process velocity and quality. Finally, structures applicable for nozzles and spinnerets are shown.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joachim Radtke, Joachim Radtke, Tobias Abeln, Tobias Abeln, Michael Weikert, Michael Weikert, Friedrich Dausinger, Friedrich Dausinger, } "High-precision microcutting of ceramics with short-pulsed solid state lasers", Proc. SPIE 4088, First International Symposium on Laser Precision Microfabrication, (6 November 2000); doi: 10.1117/12.405713; https://doi.org/10.1117/12.405713
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Material removal processing with Nd:YAG lasers
Proceedings of SPIE (June 17 1993)
Precise drilling with short-pulsed lasers
Proceedings of SPIE (February 07 2000)
High-speed laser cutting of thin metal sheets
Proceedings of SPIE (September 07 1994)
Keyhole description in deep-penetration laser welding
Proceedings of SPIE (February 07 2000)

Back to Top