6 November 2000 Local annealing of shape memory alloys using laser scanning and computer vision
Author Affiliations +
Proceedings Volume 4088, First International Symposium on Laser Precision Microfabrication; (2000) https://doi.org/10.1117/12.405705
Event: First International Symposium on Laser Precision Microfabrication (LPM2000), 2000, Omiya, Saitama, Japan
A complete set-up for local annealing of Shape Memory Alloys (SMA) is proposed. Such alloys, when plastically deformed at a given low temperature, have the ability to recover a previously memorized shape simply by heating up to a higher temperature. They find more and more applications in the fields of robotics and micro engineering. There is a tremendous advantage in using local annealing because this process can produce monolithic parts, which have different mechanical behavior at different location of the same body. Using this approach, it is possible to integrate all the functionality of a device within one piece of material. The set-up is based on a 2W-laser diode emitting at 805nm and a scanner head. The laser beam is coupled into an optical fiber of 60(mu) in diameter. The fiber output is focused on the SMA work-piece using a relay lens system with a 1:1 magnification, resulting in a spot diameter of 60(mu) . An imaging system is used to control the position of the laser spot on the sample. In order to displace the spot on the surface a tip/tilt laser scanner is used. The scanner is positioned in a pre-objective configuration and allows a scan field size of more than 10 x 10 mm2. A graphical user interface of the scan field allows the user to quickly set up marks and alter their placement and power density. This is achieved by computer controlling X and Y positions of the scanner as well as the laser diode power. A SMA micro-gripper with a surface area less than 1 mm2 and an opening of the jaws of 200(mu) has been realized using this set-up. It is electrically actuated and a controlled force of 16mN can be applied to hold and release small objects such as graded index micro-lenses at a cycle time of typically 1s.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Moustapha Hafez, Moustapha Hafez, Yves Bellouard, Yves Bellouard, Thomas C. Sidler, Thomas C. Sidler, Reymond Clavel, Reymond Clavel, Rene-Paul Salathe, Rene-Paul Salathe, } "Local annealing of shape memory alloys using laser scanning and computer vision", Proc. SPIE 4088, First International Symposium on Laser Precision Microfabrication, (6 November 2000); doi: 10.1117/12.405705; https://doi.org/10.1117/12.405705


Bar code scanning
Proceedings of SPIE (April 30 1990)
Laser Mike Optical Micrometers: In Theory And In Use
Proceedings of SPIE (October 22 1986)
A novel high speed 2D laser scanner for the 3D...
Proceedings of SPIE (November 29 2012)
Semiconductor Laser Digital Scanner
Proceedings of SPIE (February 08 1989)
Laser device for special light effects
Proceedings of SPIE (February 28 1995)

Back to Top