Paper
11 October 2000 Angle-dependent absolute infrared reflectance and transmittance measurements
Author Affiliations +
Abstract
A goniometric system is used in conjunction with an FT-IR (Fourier- Transform Infrared) spectrophotometer to perform reflectance and transmittance measurements as a function of angle of incidence from 12$DEG to 80$DEG. The input beam is polarized using a high-quality Ge reflective Brewster-angle polarizer, and is focussed onto the sample with an approximately f/50 geometry. The average angle of incidence is controlled to within +/- 0.05$DEG, and spectra are recorded for both s- and p-polarization over a wavelength range of 1.6 (mu) m to 5.2 (mu) m, using a photoconductive InSb detector. Measurement results are compared to the predictions of the Fresnel equations in order to assess the accuracy of the instrument.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Simon G. Kaplan and Leonard M. Hanssen "Angle-dependent absolute infrared reflectance and transmittance measurements", Proc. SPIE 4103, Optical Diagnostic Methods for Inorganic Materials II, (11 October 2000); https://doi.org/10.1117/12.403573
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Transmittance

Sensors

Polarizers

Mirrors

Silicon

Infrared radiation

Back to Top