High brightness and efficiency green light-emitting diodes based on fluorene-containing conjugated polymers and associated blends

Leonidas C. Palilis; Chris I. Wilkinson; David G. Lidzey; Donal D. C. Bradley; Michael Inbasekaran; Weishi W. Wu

doi:10.1117/12.416921

2 February 2001 High brightness and efficiency green light-emitting diodes based on fluorene-containing conjugated polymers and associated blends

Leonidas C. Palilis, Chris I. Wilkinson, David G. Lidzey, Donal D. C. Bradley, Michael Inbasekaran, Weishi W. Wu

Author Affiliations +

Proceedings Volume 4105, Organic Light-Emitting Materials and Devices IV; (2001) https://doi.org/10.1117/12.416921
Event: International Symposium on Optical Science and Technology, 2000, San Diego, CA, United States

Abstract

We report on the fabrication and properties of single layer green light-emitting diodes (LEDs) based on fluorene- containing conjugated polymers and associated blends. We have used a new green fluorene based conjugated polymer (namely 5BTF8) as the emissive material as well as the host in blends with a guest hole transport triarylamine/fluorene copolymer (namely BFB) to fabricate bright and efficient single layer green polymer light-emitting diodes (PLEDs). An enhancement in both the electroluminescence quantum and power efficiency is seen for the blend. This observation indicates that the hole transport material leads to a significant improvement in hole injection and transport and thus to an improved charge carrier balance factor. A higher brightness and a lower turn on as well as operating voltage are also achieved for the blend. The emission from a green single layer LED with 5BTF8/BFB (4/1) as the emissive layer reaches a maximum brightness of 35000 cd/m² with a maximum external quantum efficiency of 1.3% or 4.2 cd/A and a maximum power efficiency of 2.5 lm/W. Novel small area LEDs were also fabricated using a SiN insulating layer on top of the ITO that allowed much higher brightnesses to be achieved compared to the standard area LEDs due to the reduced heating and therefor to a better thermal management of the device. The emission from a PEDOT/5BTF8 small area LED reached a maximum brightness of 155,000 and 6,500,000 cd/m² in DC and pulsed mode, respectively.

Citation Download Citation

Leonidas C. Palilis, Chris I. Wilkinson, David G. Lidzey, Donal D. C. Bradley, Michael Inbasekaran, and Weishi W. Wu "High brightness and efficiency green light-emitting diodes based on fluorene-containing conjugated polymers and associated blends", Proc. SPIE 4105, Organic Light-Emitting Materials and Devices IV, (2 February 2001); https://doi.org/10.1117/12.416921

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE