24 October 2000 Transient nematic liquid crystal modulator as an active Q-switch for solid state lasers
Author Affiliations +
Abstract
Recently, fast electro-optical switching in planar nematic liquid crystals using Multipass and also Fabry-Perot modulators has been reported. By applying short driving- voltage pulses of 150 V microsecond switching times have been achieved with nematic planar cells (NPC) and even sub- microsecond switching in case of nematic Fabry-Perot modulators (NFPM). In the present report the performance of these modulators depending on the thickness, the temperature, the amplitude and the width of driving pulsed voltage is discussed with respect to realization of nematic Q-switch modulators for solid state lasers. A special ITO-electrode configuration has been developed to minimize the electrical time constant of the modulators. Results of using those fast nematic modulators as active Q-switches in flash lamp pumped Nd:YAG solid state lasers are shown. Three different resonator configurations have been designed. The realized Q-switch lasers emit pulses of 40 - 70 ns duration (FWHM) and energies between 10 - 25 mJ.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ignatius Iryanto, Ignatius Iryanto, Hans Joachim Eichler, Hans Joachim Eichler, D. Grebe, D. Grebe, Rainer Macdonald, Rainer Macdonald, } "Transient nematic liquid crystal modulator as an active Q-switch for solid state lasers", Proc. SPIE 4107, Liquid Crystals IV, (24 October 2000); doi: 10.1117/12.405319; https://doi.org/10.1117/12.405319
PROCEEDINGS
7 PAGES


SHARE
Back to Top