Paper
18 December 2000 Absorption characteristics in 50 to 110-GHz of 60-GHz wave absorber using epoxy-modified urethane rubber mixed with carbon particles
Tetsu Soh, Osamu Hashimoto
Author Affiliations +
Abstract
In this study, an epoxy-modified urethane rubber mixed with carbon particles is chosen as a material of a millimeter wave absorber. The single-layer absorber is designed and produced for 60GHz band on the basis of no reflection curve and the equation of its permittivity. The absorption characteristics of the specimens were measure at the frequency of 50 to 110GHz by power reflection method. As a result, the good millimeter wave absorber with the absorption of 20dB or more was obtained at both 60GHz and 100GHz bands.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tetsu Soh and Osamu Hashimoto "Absorption characteristics in 50 to 110-GHz of 60-GHz wave absorber using epoxy-modified urethane rubber mixed with carbon particles", Proc. SPIE 4111, Terahertz and Gigahertz Electronics and Photonics II, (18 December 2000); https://doi.org/10.1117/12.422150
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Carbon

Particles

Extremely high frequency

Strontium

Antennas

Reflection

Back to Top