Translator Disclaimer
3 November 2000 System performance advances of 18-mm and 16-mm subminiature image intensifier sensors
Author Affiliations +
Abstract
Night vision system design has been centered aroudn the An/AVS-6 and AN/PVS-7 night vision goggle systems for the past 20 years. Goggle performance has improved during this time through increased performance of the image intensifier sensor, primarily the Omni IV sensor from ITT Industries Night Vision. Most of this improvement has been at the optimal light level (1E-3 fc scene illumination). Recent advances in image sensor performance from the filmless Generation (Gen) IV sensors has increased the low light level performance of night vision devices from 0.3 cy/mr to 0.7 cy/mr. In addition, sensor packaging design requirements have forced night vision sensor manufactures to design light weight, small volume sensors. ITT recently has designed such a sensor in a 16-mm format. This sensor if 50% lighter, up to 50% shorter, and has design features that simplify the objective lens design. New night vision goggles have been, and are being, designed which reduce the perceived head-supported weight. This paper presents signal-to-noise ratio, halo, and other film-less sensor data and similar 16-mm subminiature sensor data. The resulting system performance data will be described. Finally, the system design improvements and relationships with the subminiature 16-mm subminiature sensor will be given.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nils Ian Thomas "System performance advances of 18-mm and 16-mm subminiature image intensifier sensors", Proc. SPIE 4128, Image Intensifiers and Applications II, (3 November 2000); https://doi.org/10.1117/12.405866
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top