Paper
31 January 2001 Spectroscopic remote sensing of aircraft exhausts at airports
Klaus Schaefer, Achim Sedlmaier, Christoph Jahn, Joerg Heland
Author Affiliations +
Abstract
Emission indices of aircraft engine exhausts must be known to calculate precisely the emissions of aircraft on airports during different operational scenarios. FTIR emission spectroscopy of exhausts was developed further as a remote sensing multi- component analysis method. Measurements at different aircraft engines were used to develop basically and optimize the measurement and analysis procedure during run up tests at ground level. The measured main engines are GE90-85B and RB211 as well as APUs of the B777 and B747. A temperature stabilized spectrometer in a van collected good quality spectra at 0.2 cm-1 resolution. The FTIR instrument was aligned to the engine nozzle exit with a two axis movable entrance mirror. Setting up the system needs about 10 to 20 minutes, if all systems are running on standby. Total measurement times at one thrust level should be around 5 minutes to obtain reliable results. The FTIR engine measurement results for CO2, CO, and NO have been proven to be in agreement with intrusive measurement data collected during engine runs in a test rig. The deviations were generally in the order of +/- 30 percent, i.e. comparable to the day-to-day variations of the engine emissions.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Klaus Schaefer, Achim Sedlmaier, Christoph Jahn, and Joerg Heland "Spectroscopic remote sensing of aircraft exhausts at airports", Proc. SPIE 4168, Remote Sensing of Clouds and the Atmosphere V, (31 January 2001); https://doi.org/10.1117/12.413863
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectroscopy

Electroluminescence

FT-IR spectroscopy

Infrared radiation

Absorption

Remote sensing

Temperature metrology

Back to Top