You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
8 August 1983A Wavelength Division Multiplexing Experiment At 1260 and 1330 Nanometers
An experiment was performed using two-channel wavelength division multiplexing and demultiplexing devices to determine the feasibility of using 1260 nm and 1330 nm lasers. The experiment showed that it was feasible to use wavelengths with separation of 70 nm; however, these devices would not be standard commercial devices. The devices were manufactured using dichroic coatings designed for two specific wavelengths. Pigtails were mounted on the devices so that connectors could be used to couple into a 10 km span of fiber. The results of the experiment show the insertion loss of the devices, crosstalk from Channel 1 to Channel 2, and a comparison of bit error rate performance.
John M. Rieger
"A Wavelength Division Multiplexing Experiment At 1260 and 1330 Nanometers", Proc. SPIE 0417, Fiber Optics Multiplexing and Modulation, (8 August 1983); https://doi.org/10.1117/12.935938
The alert did not successfully save. Please try again later.
John M. Rieger, "A Wavelength Division Multiplexing Experiment At 1260 and 1330 Nanometers," Proc. SPIE 0417, Fiber Optics Multiplexing and Modulation, (8 August 1983); https://doi.org/10.1117/12.935938