Translator Disclaimer
22 August 2000 Fabrication of the moving liquid mirror (MLM) spatial light modulator in a standard CMOS process
Author Affiliations +
Proceedings Volume 4178, MOEMS and Miniaturized Systems; (2000)
Event: Micromachining and Microfabrication, 2000, Santa Clara, CA, United States
Spatial light modulators (SLM) with addressing through a silicon backplane are gaining importance as microdisplays, for pattern generation in direct-writing systems and for several other applications. The use of CMOS technology has lead to small devices with a high grade of inspection. With the focus on direct-writing systems for photolithographic patterning we have developed tow micromechanical actuator technologies for SLMs with silicon backplane. Here we report on a third technology that employs an oil film on a mirror as micromechanical actuator. The principle of operation is explained and fabrication is described in detail. Demonstrators with 256 by 256 pixels have been fabricated with 16 micrometers and 20 micrometers pixel size. Photographs of programmed images are presented. Measurements of passive devices demonstrated a contrast ratio of 43:1 and a switching time of below 5ms.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander Wolter, Hubert K. Lakner, Heinz Kueck, Wolfgang Doleschal, Kay-Uwe Kirstein, Andreas Rieck, and Kai Frohberg "Fabrication of the moving liquid mirror (MLM) spatial light modulator in a standard CMOS process", Proc. SPIE 4178, MOEMS and Miniaturized Systems, (22 August 2000);


Pump it up
Proceedings of SPIE (April 03 2012)
MEMS spatial light modulators with integrated electronics
Proceedings of SPIE (October 02 2001)
A new deformable mirror for adaptive optics
Proceedings of SPIE (January 23 2006)

Back to Top